BELCOIN® Blog

BELCOIN® Blog

About This Blog ...

Hi folks ! Welcome to this blog for and about BELCOIN® products.
We 'd like you to post all your comments, problems, solutions, ideas which you discovered by using BELCOIN® products. We, from our side, will publish relevant information and comments on new hardware, software and/or firmware.
This blog will be made for you and by you !
The basic language for this blog is English which is most common for technical support worldwide, though French and Dutch are possible too !

NEW 50€ update !!

NE77 - Bill AcceptorPosted by Bernard 13 Jun, 2018 16:08:38

LATEST NE77 FIRMWARE released on our website since 2017-05-10
Firmware NKFX00KVC020000EU408 - Chksm E2F4
This firmware is for optimal use with the output flaps as the motor spins 2 seconds longer then before. Mind the new dipswitch setting !

Dip 9 ON : will Enable the "4 Bill Rejections" safety procedure, then the Bill Acceptor will stop working for 30 Sec to prevent fraude

  • Comments(2)//blog.belcoin.eu/#post7

New 20€ Firmware

NE77 - Bill AcceptorPosted by Bernard 21 Jan, 2016 10:05:41

LATEST NE77 FIRMWARE released on 2015-11-11
Firmware NKFX00HA405JC09EU406 - CHKSUM - 95C8

This firmware is for optimal use with the output flaps as the motor spins 2 seconds longer then before. Mind the new dipswitch setting !

Dip 9 ON : will Enable the "4 Bill Rejections" safety procedure, then the Bill Acceptor will stop working for 30 Sec to prevent fraude.

  • Comments(2)//blog.belcoin.eu/#post6

Power up your FP-004

FP-004 ProgrammerPosted by Bernard 21 Jan, 2016 09:54:09

For updating the FP-004 programmer box with the latest firmware from your PC, you need a 12vDC-1000mA (1A) Regulated Power Adaptor (which is not included) and the following cables :

  • #WEL-RF303 (Sub-D-Connector to PC COM-port)
  • #WEL-RCC42 (to NE77)

Click the white male and female connectors together.

Most recent PC's do not support SUB-D connectors anymore. In that case you need an USB to Sub-D converting cable, which you can buy in your regular computer store.

Windows users should check the COM port number in their "Control Panel / Systems and Security / Device Manager" That number should correspond with the port number in the FP-004 application.

  • Comments(0)//blog.belcoin.eu/#post5

How to use the FP-004

FP-004 ProgrammerPosted by Bernard 21 Jan, 2016 09:51:49

Download and unzip the software before installing. Use the right looms to connect your hardware.

Open the "ICT" application. Select "Bill-Acceptor", "NE77", "FP004" and the COM-port dedicated by device manager. Click "Load File" and select the desired firmware file on your harddisk.

Click "Download" in the left upper corner and select FP-004. The firmware will be programmed in your FP-004 box. Every step is monitored on screen.

Once you succeeded, you can use this box to update all your NE77's on-site.

  • Comments(3)//blog.belcoin.eu/#post4

New 20€ update

NE77 - Bill AcceptorPosted by Bernard 24 Sep, 2015 22:18:07
As from 01/09/2015 on, a new firmware update for accepting the new 20€ Bills is available at our website www.belccoin.be Download it for free and use the programmer application to upload it to your FP-004 programmer. Then program it into your NE77 bill acceptors.

  • Comments(0)//blog.belcoin.eu/#post3

Firmware BEEB

NE77 - Bill AcceptorPosted by Bernard 13 Dec, 2014 19:38:50
New NE77 firmware version available since 2014-10-14.
Firmware NKFX00BA404JC08EU404 - CHKSUM : BEEB
This update solves the poor acceptance of new printed 50€ bills.

  • Comments(0)//blog.belcoin.eu/#post2

50€ Bills

NE77 - Bill AcceptorPosted by Bernard 26 Sep, 2014 00:05:49

Some NE77 customers experience a poor acceptance of the 50€ bills, especially new bills. Regarding the feedback we have, it concerns about 1 to 3 % of the bill acceptors in the field right now.

Our advice : use your FP-004 programmer to upload the latest firmware (chksm 21A4) into your NE77 device and test it.

If the problem isn't solved, turn in your devices for replacement so we can do diagnostic test to analyse the problem.



  • Comments(0)//blog.belcoin.eu/#post1

Firmware 21A4

NE77 - Bill AcceptorPosted by Bernard 18 Aug, 2014 23:20:15
Date : 2014/08/10 - Filename: NKFX009A404JC07EU403(21A4).bin

Checksum : 21A4

Made by the R&D department due to the following 3 reasons ;

1. Pulse issue for compatibility with Wimi bingo machine (BUSY/ABN. Signal)

2. DIP switches for banknote value selection (*)

3. Some components phased out on NE77, including U5, U6, U7, U8

Please help test to approve it in the most popular machines, like SIRMO, SPLIN, VIDITIS, etc.

This firmware will be loaded into the next production of 5,000pcs NE77

(*) use dips 7 and 8 as follows, TO SELECT THE TYPE OF NOTES ACCEPTED :

Dip7 Dip8 Notes accepted
0 0 5 / 10 / -- / --
0 1 - / 10 / 20 / 50
1 0 5 / 10 / 20 / --
1 1 5 / 10 / 20 / 50



  • Comments(0)//blog.belcoin.eu/#post0